Metal Lathes
Central Machinery 14″ x 40″ Gear Head Gap Bed Metal Lathe
Metal Lathes – click on the image below for more information.
- 16 spindle speeds from 45 to 1800 RPM
- Four-way tool post and lockable tool slide
- 37 metric threads, 40 inch threads, and 39 Whitworth threads
- 6-5/16″ diameter chuck with 3-1/2″ diameter capacity, reversible jaws included
- 54″ L x 8-3/16″ W bedway;
Metal Lathes
This professional quality machine lets you turn pieces up to 17″ over the gap. Belt drive for smooth, consistent power.; – Visit Harbor Freight Tools For More Information.
Metal Lathes Offer Price:
Popular Metal Lathes For Sale
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
Lathe Machines
AccuRemote 6″ Z-AXIS VERTICAL SUPER HIGH ACCURACY DIGITAL READOUT (DRO) Stainless Steel for Mill / Lathe
Lathe Machines – click on the image below for more information.
- Preset function
- Easy to view large LCD display
- Hardened STAINLESS STEEL rule and slide
- Travel range: 0-6” (150mm)
- Resolution: 0.0005″ (0.01mm)
Lathe Machines
Professional Quality Tool
This vertical digimatic scale units are designed specifically for convenient display of Z-axis machine tool movement. Can be mounted on almost any surface, offering the user precise linear measurment capabilities. Precise depth control floating zero allows you to set “zero” anywhere within operating range with a push of a button.
The length can be cut to fit any setup.
Features:
- Preset function
- Easy to view large LCD display
- Hardened STAINLESS STEEL rule and slide
- Travel range: 0-6” (150mm)
- Resolution: 0.0005″ (0.01mm)
- Accuracy +/-0.001″ (+/-0.03mm)
- Repeatability: 0.0005″ (0.01mm)
- Large LCD Display
- Powered by a single battery which lasts about 1 year with normal use ( a second spare battery is included)
- Controls: Zero reset, On/Off, inch/mm/fraction conversion, Hold, Absolute.
- Interchangable mounting brackets are included.
- Readout bracket is included
- Stainless steel beam
- IP54 WATER / OIL / DUST RESISTANT – Protection Classification (light splashes)
Lathe Machines List Price: $ 100.00
Lathe Machines Offer Price: $ 49.99
Popular Metal Lathes For Sale
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Metal Lathes
Lathe Chuck, 3-Jaw 6″
Metal Lathes – click on the image below for more information.
- 3-jaw self centering lathe chuck
- 6″ (160 mm) diameter
- Includes chuck key, inside and outside jaws
- Plain back mounting
Metal Lathes
This 6″ 3-Jaw self-centering lathe chuck includes a chuck key, inside and outside jaws, and mounting bolts. This chuck has a 1.57″ (40 mm) through hole. The chuck can hold work up to 5.70″ (145 mm) in diameter. This is a plain back chuck and requires a backplate adapter to mount it. The radial runout of a test bar held in this chuck, when the chuck is mounted true, is 0.003″ maximum.
Metal Lathes Offer Price: $ 83.00
Popular Metal Lathes For Sale
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Metal Lathe
20 Piece Metal Working Lathe Tool Kit
Metal Lathe – click on the image below for more information.
- Right, left and straight tool holders with wrench and cutting tools
- Knurling holder with rotating head and two knurl wheels;
Metal Lathe
Perfect starter kit to use with your bench lathe for all your metal working projects. Requires a minimum 7/8″ tool post – Visit Harbor Freight Tools For More Information.
Metal Lathe Offer Price:
Popular Metal Lathes For Sale
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Lathe Machines
JET 708360 JWL-1642EVS-2 Electronic Variable Speed Woodworking Lathe, 16-Inch Swing 42-Inch between Centers 2-Horsepower 230-Volt 1-Phase
Lathe Machines – click on the image below for more information.
- Variable-speed control for matching the tool speed to a wide variety of turning applications
- Weighs 420 pounds for optimal stability and reduced vibration
- Superior cam lock lever mechanisms for moving the headstocks, tool rests, and tailstocks without any tools
- Includes long tool rests, faceplates, live centers, spur centers, spindle locks, indexing locks, and knockout bars
- Legs with special webbings for two-by-four or tool-and-sandbag shelving
Lathe Machines
Includes 16-in x 42-in 2 HP Woodworking Lathe – 708360, 14-in Tool Rest, 6-in Face Plate, Spur Center, Dual-Bearing Live Center, Live Center, Tooling Knockout, Spindle &, Indexing Locks, Safety Shield &, Brake Resistor, WrenchJET’s JWL-1642EVS-2 Variable-Speed Woodworking Lathe provides accuracy, capability, durability, and value. With the versatility of its sliding headstock, electronic variable speed, and capacity for large spindle or bowl projects, this lathe is ideal for serious wood turners and novices alike.
Cast-Iron Construction for Stability and Vibration-Free Operation
Designed to take on projects both large and small with its 16-inch swing and 42-inch capacity, the JWL-1642EVS-2 has a heavy-duty, cast-iron bed to ensure long-term accuracy and smooth operation. The leg sets are also made of sturdy cast iron and feature widely spaced feet with adjustable pads to maintain a solid, secure stance, even on uneven surfaces. The legs make the JWL-1642EVS-2′s spindle (center) height a comfortable 44.5 inches above the floor.
 The high-strength spindle is supported by rigid headstock. View larger. |
 The strong three-phase motor ensures plenty of power. View larger. |
 The tailstock’s ram has graduations for precise drilling. View larger. |
 |
 This Jet wood lathe is cast from heavy-duty iron that ensures its operation remains smooth and accurate. View larger. |
For added ease of operation, a handy swing-out basket is mounted below the bed for tool and supply storage. A cast-iron tool rest maintains rigidity and is easy to position with its long handle.
10-Degree Spindle Increments and Easy-Release Headstock for Versatility
The JWL-1642EVS-2′s cast-iron headstock provides rigid support for the motor and high-strength spindle. Thanks to built-in internal indexing, the large-diameter spindle can be locked in 36 positions, which translates to 10-degree increments for drilling, fluting, grooving, and other operations. To increase versatility, the headstock can be moved to any position along the bed by simply releasing its lock with an easy-to-use handle.
For added convenience, the push-button spindle lock on the front of the spindle gives you a simple, tool-free way to lock the spindle for installing or removing the faceplate, chuck, or other screw-down accessories.
Powerful, Fan-Cooled Motor for Long-Term, Robust Performance
JWL-1642EVS-2 is equipped with a two-horsepower, three-phase, 230-volt motor that’s fan cooled to resist dust contamination. Additionally, dial-operated infinite-speed controls on the front of the headstock allow you to match the ideal speed to the job. At the same time, a large digital LED makes it easy to monitor the spindle speed, and a toggle switch on the front panel lets you choose forward or reverse spindle directions.
This lathe also uses a precision-made stepped pulley system that creates distinct low (zero to 1,200 RPM) and high (up to 3,200 RPM) speed ranges. The pulleys are driven by a serpentine-style belt that is designed for smooth power transmission, low slippage, and dramatically reduced heat generation when compared to a V-belt.
Easy-to-Lock, Large Tailstock for Stability
The large tailstock has the mass and wide base needed for stability, and it slides to the end of the bedway for easy outboard turning. The large ram has a full, four-inch travel, which is operated by an easy-to-turn, five-inch-diameter hand wheel that’s fitted with a spinner handle. Additionally, the ram has the popular #2 Morse taper and a 3/8-inch diameter through hole, which is convenient for drilling lamp bases. And like the tool rest base, a large handle makes it easy to lock the tailstock securely in place.
The JWL-1642EVS-2 comes with a five-year warranty.
About JET
JET began by selling air hoists and trolleys out of a hardware store in Seattle, Washington in 1958. Since then, JET has sold everything from snowmobiles to transmitter radios, forklifts, and nylon stockings. By the early 1970s, however, metalworking had become the base of JET’s business, and by the 1980s, the company had expanded into the realm of woodworking. Today JET offers a wide range of popular woodworking tools that are backed with best-in-class features and excellent service.
What’s in the Box
Lathe, two cast-iron legs, one tailstock, one headrest, one tool rest body, one tool basket, one guard assembly, warranty card, assorted accessories, and manual.
Lathe Machines List Price: $ 3,140.00
Lathe Machines Offer Price: Too low to display
Lathe Machines question by d: Give some objective questions and answers on lathe machine?
I am a student of mechanical engineering. I want to know some viva or objective questions for interview or in class useful to me. Please help me.
Lathe Machines best answer:
Answer by koops91
What is a Lathe Machine?
How does this device help one to do whatever it is that it does..?
Popular Metal Lathes For Sale
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Metal Lathes
Central Machinery 13″ x 40″ Gear Head Gap Bed Metal Lathe
Metal Lathes – click on the image below for more information.
- Chuck diameter: 6-1/4″
- Chuck capacity: 3-3/8″
- Swing over bed: 13-1/4″
- Swing over gap: 16-1/4″
- Lockable cross slide travel: 5-1/8″;
Metal Lathes
Expect professional performance from our Gap Bed Metal Lathe for your highest-quality metal turning Gear-head, gap bed – Visit Harbor Freight Tools For More Information.
Metal Lathes Offer Price:
Popular Metal Lathes For Sale
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOLTON TOOLS INDUSTRIAL GRADE 12″ x 30″ HIGH PRECISION CNC LATHE – CNC Lathes & CNC Milling Machines
Lathe Machines
BOLTON TOOLS INDUSTRIAL GRADE 12″ x 30″ HIGH PRECISION CNC LATHE – CNC Lathes & CNC Milling Machines
Lathe Machines – click on the image below for more information.
- GREAT-60TT CNC Control, Manual machining function, Teach and playback programming
- Full G-code CNC capability, Auto spindle jog during gear changes, Vector control spindle drive
- Feedrate override:0-120%, Spindle override:0-120%, Backlash error compensation, Power contactor
- Ballscrew pitch error compensation, Run-time/Part-count display, Primary CNC M-code controlled
- Secondary CNC M-code controlled, Shipping Weight – 2860lbs
Lathe Machines
2. Swing over bed – 11.8″
3. Swing over corss slide – 7″
4. Distance between center – 29.5″
5. Width of bed – 8.66″
6. Spindle bore – 1-1/2″ 7. Spindle nose – MT5
8. Spindle tape – 6MT
9. Spindle speeds – 80-2300R/MIN
10. (Vector spindle control)100-1600RPM
11. Spindle Motor – AC/4HP 3 phase 220V
12. Cross slide travel(X-axis) – 6″
13. Longitudinal travel(Z-axis) – 25″
14.Rapid traverse(X/Z-axis) – 100 IPM/200 IPM
15. STEP motor torque(X/Z-axis) – 6N.M./12N.M 16. Tailstock quill diameter – 1.77″
17. Tailstock taper – 3MT
18. Tailstock travel – 3.7″
19. net machine weight – 2430lbs
Lathe Machines Offer Price: $ 14,948.85
Popular Metal Lathes For Sale
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Lathe Machines
Proxxon 27026 Three Jaw Chuck for the Lathe DB 250
Lathe Machines – click on the image below for more information.
- Jaws engineered for concentric clamping so 3 jaws work simultaneously to hold round pieces centered to very close tolerances
- The chuck has a metric 16×1 threat for fitting directly to the DB250 spindle
Lathe Machines
For use with Micro Woodturning Lathe DB250
Lathe Machines List Price: $ 65.00
Lathe Machines Offer Price: $ 52.95
Popular Metal Lathes For Sale
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Precision Lathe
ALORIS Super Precision Quick Change Tool Post Set – Model .: BXA LATHE SWING : 10″ – 15″
Precision Lathe – click on the image below for more information.
- Speed lathe operation up to 90%.
- Only a second to change tools.
- No time wasted with shims.
- Unlimited versatility.
Precision Lathe
No tool post indexing necessary. No need to disturb basic set-up. Includes: (1) Tool post. (1) Each of toolholders: #1, #2, #4D and #8
Precision Lathe Offer Price: $ 719.99
Popular Metal Lathes For Sale
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Precision Lathe
Central Machinery 7″ x 10″ Precision Mini Lathe
Precision Lathe – click on the image below for more information.
- Automatic feed
- Chuck guard with micro switch
- Variable speed control knob
- Speeds (RPM): low-0 to 1100
- high-0 to 2500 RPM;
Precision Lathe
Mini Lathe Gear set gives 18 different threads! This precision mini lathe is used for turning, counter facing, making – Visit Harbor Freight Tools For More Information.
Precision Lathe Offer Price:
Popular Metal Lathes For Sale
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
